|
TEW-434APB Wireless
PoE Access Point is today’s link to Wireless
Technology. Compliant with the IEEE Wireless
Networking Standard 802.11g, it provides Direct
Sequence Spread Spectrum (DSSS) operation for
transparent bridging and roaming capabilities for
wireless nodes. The TEW-434APB also provides WDS
bridging functions, allowing users to connect two or
more Access Points together, wirelessly. With this
Wireless Access Point and Wireless Network Adapters,
users can connect to Ethernet/Fast Ethernet LAN at
home or office to access network resources with
coverage up to 300 meters. |
Pyydä tarjous
Liity postituslistalle
|
- Operates as Access
Point, AP Client, WDS Wireless Bridging, or Repeater
modes
- Power over Ethernet (PoE)
IEEE 802.3af support
- Provides Security with
64/128-Bit WEP, WPA/WPA2 and WPA-PSK/WPA2-PSK
- WDS Security supports
64/128-Bit WEP, WPA-PSK/WPS2-PSK
- Supports 802.1x
Authentication and MAC Address Control for Authorization
Access (20 entries)
- Allow users to Disable
ESSID Broadcast to Increase Wireless Security
- Built-in 10/100Mbps
Auto-Sensing Fast Ethernet PoE Port
- Dynamic Data Rate
Scaling at 54, 48, 36, 24, 18, 12, 9 and 6 Mbps for
802.11g
- Dynamic Data Rate
Scaling at 11, 5.5, 2 and 1 Mbps for 802.11b
- Allow Auto Fallback
Data Rate for Optimized Reliability, Throughput and
Transmission Range
- 2dBi Detachable
Diversity Antenna. Replace with Optional High-Gain
Antenna to Extend the Range/Coverage Area.
- Easy Configuration and
Maintenance with Web Browser (HTTP)
- Flash Memory for
Firmware Upgrade and Save/Restore Settings
- Supports Most
Operating Systems, such as Windows 95/98/ME/NT/2000/XP,
Unix and Mac
- Distance coverage 50
to100 meters indoor, 100 to 300 meters outdoor depending
on the environment
- 3-Year Warranty
|
Hardware |
|
Standards |
IEEE 802.11b/g (Wireless
LAN)IEEE 802.3u (Fast Ethernet); IEEE 802.3af PoE |
|
Media Connector |
10/100Mbps, Half/Full
Duplex |
|
LED Indicators |
WLAN, LAN |
|
Power |
7.5V DC, 1A External
Power Adapter
48V DC from PoE source via Ethernet Port |
|
Dimensions |
150 x 110 x 30 mm
(without antenna) |
|
Weight |
226g. |
|
Temperature |
- Operating: -0°
~ 40°C
- Storage: -25°
~ 70°C
|
|
Humidity |
Max. 90% (non-condensing) |
|
Certifications |
CE, FCC |
|
Wireless |
|
Frequency Range |
2.412 ~ 2.484 GHz |
|
Modulation
|
- 802.11b: DSSS
- 802.11g: DBPSK/DQPSK/CCK/OFDM
|
|
Protocol |
CSMA/CA with ACK |
|
Data Rate(Auto
Fallback) |
- 802.11b: 11,
5.5, 2 and 1Mbps
- 802.11g: 54,
48, 36, 24, 18, 12, 9 and 6Mbps
|
|
Operating Modes |
AP, AP Client, WDS,
AP+WDS or Repeater Modes |
|
Channel |
1~ 11 Channels (US)
1~13 Channels (EU) |
|
Security |
64/128-Bit WEP
(Hex/ASCII), WPA/WPA2 (802.1x)
WPA-PSK/WPA2-PSK
MAC Address Filter, SSID Broadcasting Control
|
|
Antenna |
1 x 2dBi Detachable
Diversity Antennas with Female Reverse SMA Connector |
|
Output Power |
13 dBm (min) |
|
Transmit Power |
- 802.11b: 18dBm
(typically)
- 802.11g: 15dBm
(typically)
|
|
Receiving Sensitivity |
- 11Mbps 8% PER
@ -78dBm (typical)
- 54Mbps 10% PER
@ -68dBm (typical)
|
-
TPE-101I Power over
Ethernet (PoE) Injector
-
TPE-102S Power over
Ethernet (PoE) Splitter
-
TPE-S88 16-Port
10/100Mbps Web Smart PoE Switch
-
TPE-80WS 8-port
Gigabit Web Smart PoE Switch
-
TPE-S44 8-Port
10/100Mbps PoE Fast Ethernet Switch
-
TPE-224WS 26-Port
Gigabit Web Smart PoE Switch
-
TEW-434APB 54Mbps
802.11g Wireless PoE Access Point
-
TV-IP201P PoE
Internet Camera Server with Audio
|
|
|
